Skip to main content

Changes to Step #56

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

-[* black] Insert wisdom here.
+[title] Installing the Power Panel
+[* black] Feed the (5) wires from the power panel through the opening in the side of base assembly directly adjacent to the power supply.
+[* black] Remove the terminal screws from the power supply and install the wires. The colors correspond as before:
+ [* black] 18awg black = L
+ [* black] 18awg white = N
+ [* black] 18awg green = ground
+ [* black] The red and black leads from the fan will connect to +V (red) & -V (black).