Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #17

Edit by Caleb Fairres

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] Install Side Plate in Base
[* black] Each side plate will be secured with (2) 6-32" screws coming up from the bottom.
[* black] Fully tighten all screws.
-[* black] You will secure each assembly with (2) 6-32 x 1" screws. This may be done easiest by cantilevering the base plate over the edge of a table. After you have all (6) screws started you can flip the assembly over and fully tighten.
[* black] Insert nylon lock nuts into the side plate (as done in previous steps). You will use a total of (24) nylon lock nuts.