Changes to this Step
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| [title] Idler Plate Preparation | |
| - | [* 1] Insert the 6-32 nylon lock nuts into their pockets. (2 per injection molded piece). |
| - | [* 1] Install the TSLOT hardware. Remember to only start the 1/4-20 button head screws into the TSLOT nuts. |
| + | [* 1] If you haven't already, install the TSLOT hardware. Remember to only start the 1/4-20 button head screws into the TSLOT nuts. |