Changes to Step #10
Step Lines
| + | [title] Base Tower Supports TIPS |
|---|---|
| + | [* 1] Insert the 6-32 nylon lock nuts into the injection molded parts first. There will be 2 of these nuts inserted per injection molded piece. |
| + | [* 1] Then install the 1/4-20 button head screws and T-SLOT nuts. Remember to only get the nut started on the screw. |
| + | [* 1] Press the bearing / cover assembly (pre-assembled by SeeMeCNC) onto the posts inline with the 1/4-20 hardware (position shown). |
| + | [* 1] The two halves will be fastened together with #4 x 1/2"screws. |
| + | [* 1] Complete 3 identical assemblies. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added