Changes to Step #11
Step Lines
| + | [title] Advanced - Editing Profile Settings |
|---|---|
| + | [* 1] You can modify profile settings in Cura. These settings are located on the right hand side of the screen. There are a multitude of settings that you can modify. To get to these setting you will have to move the slider to "Custom" |
| + | [* 1] By default only some settings are shown. You can access all of the settings here by going to Preferences > Configure Cura > Settings > Click in the box labeled - Check All |
| + | [* 1] Hovering your cursor over any setting will provide you with a brief explanation. |
| + | [* 1] After you have made any changes to the slicing profile you will need to click the prepare button in the bottom right hand corner to re-slice the part. To save the change for later use you can click the active profile. Then choose from the 3 options shown in the third image. |
| + | [* 1] A STAR in next to the name of a profile indicates that changes have been made to the active profile that have not been saved or discarded. |
| + | [* 1] If at any time you would like to go back to default settings, access the profile manager and import a fresh profile (downloaded from the [https://github.com/seemecnc/slicing-profiles|SeeMeCNC Github page]) |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added