Changes to Step #10
Step Lines
| + | [title] Ready to Print |
|---|---|
| + | [* 1] When you are ready to print click ***Prepare*** in the bottom right hand corner. It is recommended that you first check the layer/slice preview. This is located in a drop down near the top of the screen. Change from ***Solid View*** to ***Layer View*** You can use the slider to preview the slice prior to printing. |
| + | [* 1] When you are ready to print click the ***Save to File*** or ***Save to Removable Drive ***button in the bottom right hand corner. If you print via a Raspberry Pi (OctoPrint / AstroPrint) choose Save to File. You can then choose where to save the file and later transfer it. |
| + | [* 1] After you have saved the file, Cura will provide you with the file location, name, and the option to eject the memory device. |
| + | [* 1] Transfer the memory device (or file if using Raspberry Pi) to your printer and begin the print. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added