Changes to Step #5
Step Lines
| + | [title] Soldering Wires to Heated Bed |
|---|---|
| + | [* 1] Move the heated bed close enough to the printer that the wires will reach the pads that you have tinned. |
| + | [* 1] Fan out the exposed strands of wire for the 12awg red and black wires. Solder them to the heated bed in the location indicated. NOTE: These are large wires and pads. You will need to ensure that the pads and wire strands get hot enough to wick the solder throughout resulting a good solder joint. Apply additional solder as needed. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added