Changes to Step #2
Step Lines
| + | [title] LED & Resistor |
|---|---|
| + | [* 1] Solder the resistor to the heated bed. |
| + | [* 1] Solder the LED to the heated bed. NOTE the polarity of the LED in the picture. The short leg is the - and the long is the + |
| + | [* 1] You can cut the excess resistor and LED leads after you have soldered it to the bed. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added