Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

+[title] PID Tuning the Hot End
+[* black] Next you need to PID Tune your hot end. this will ensure that the algorithm that controls the power to the heating element is working at optimal performance.
+[* black] Send the following command via the terminal: M303 P0 S280 X0
+[* black] Full explanation: M303 is the instruction to start the Autotune Process, P0 instructs it to perform the test for the hotend, S280 sets the temperature to run the test to, and X0 is the instruction to save the results to EEPROM

Image 1

No previous image