Changes to Step #42
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [title] Ensure the Whip has Enough Slack |
| + | [* 1] Connect the 8 position pluggable connector to the HE280 Hotend. This plug is keyed. Align the connector and press it into the plug. |
| + | [* 1] Bring the hotend/arms down to the height of the bed, (nozzle touching) at the location furthest from the extruder. This location is located to the left of the Y axis tower. |
| + | [* 1] Secure the hotend whip to the extruder mounting panel with a cable tie. |