Changes to this Step
Step Lines
| [title] Preparing the PTFE (Bowden Tube) | |
| - | [* 1] The PTFE tube that is supplied with your upgrade is the length required for the [https://www.seemecnc.com/products/ezrstruder|EZR Struder|new_window=true] If you ++***have not***++ upgraded to this extruder you will want to trim 40mm off the end of the PTFE tube. end of the PTFE tube. |
| + | [* 1] The PTFE tube that is supplied with your upgrade is longer than the length required for the extruder. You will need to trim the PTFE to length in order for it to fit your machine. |
| + | [* 1] You should |
| [* 9] YOU MUST NOT USE SCISSORS. YOU MUST USE A SHARP BLADE SUCH AS A UTILITY OR HOBBY KNIFE. | |
| - | [* 10] In the picture the original EZStruder is being used, therefore the PTFE was trimmed by 40mm. |