| - | [* 1] Insert wisdom here. |
|---|
| + | [title] Wiring the New Whip |
|---|
| + | [* 1] There are 3 wires that will connector to the top left corner of the RAMBo output terminals. These wires are the 18awg red, 18awg black, and 26awg orange. |
|---|
| + | [* 10] There are (2) red wires, and (2) black wires in the hot end whip. The 18awg wires are the THICKER wires. |
|---|
| + | [* 10] Ensure that the screw terminals on the RAMBo are loose before inserting any wires. |
|---|
| + | [* 1] Insert the black 18awg wire into the Heat 0 negative location |
|---|
| + | [* 1] Insert the red 18awg wire into the Heat 0 positive location |
|---|
| + | [* 1] Insert the orange 26awg wire into the Fan 0 negative location |
|---|