Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

+[title] Remove Accessories from Glass Plate
+[* black] Carefully remove all shrink wrap from the glass build plate. Be careful not to cut the accessories (or yourself) if you are using a knife.
+[* black] Replace the glass build plate back on the printer.
+[* black] Rotate the [BLUE] bed clamps to clamp the glass build plate down.

Image 1

No previous image

Added

Image 2

No previous image

Added