Changes to Step #2
Step Lines
| [title] Remove the Shrink Wrap | |
| + | [* 1] Remove the printer from the shipping container if you have not done so already. You can do this by lifting the printer straight up out of the container. The best place the grab the machine is by the vertical rails (silver aluminum rails). |
| [* 1] Carefully remove all shrink wrap from the frame of the printer. Be careful not to cut the machine (or yourself) if you are using a knife. | |
| [* 10] Don't worry about removing the shrink wrap from the bed. We will get to that in future steps. |