Changes to Step #45
Step Lines
| + | [title] Assemble the Ball Joint Platform |
|---|---|
| + | [* 1] From the 290mm IM Arm / Platform Sub-Assembly Pack, locate the Ball Joint Platform (70857), Ball Joints for IM Carriage/Platform (70855), (6) #4 x 3/8" sheet metal screws (30250), and (6) #4 SAE Flat Washers (30449). Set the rest of the parts from that pack aside for later use in Final Assembly. |
| + | [* 1] Install the joints onto each of the three sets of posts on the ball joint platform as shown. |
| + | [* 1] Install a #4 washer and #4 x 3/8" sheet metal screw into each post to secure the ball joints. |
| + | [* 1] Fully Tighten. |
Image 1
No previous image
Added
Image 2
No previous image
Added