Changes to Step #58

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here.
+[title] Install Top Cover
+[* 1] Locate the Top Cover HE280 Mount (71258) and (3) #4 x 3/8" sheet metal screws.
+[* 1] Orient the cover onto the top of the hot end assembly. There is only 1 orientation that will work.
+[* 1] Secure the cover with the #4 x 3/8" sheet metal screws.
+[* 1] Fully tighten, but do not over tighten.