Changes to Step #52
Step Lines
| - | [title] Making the Splice |
|---|---|
| + | [title] Making the Splice ( REV 5 Board ONLY) |
| + | [* 1] If you have received a REV6 accelerometer board, this step is NOT required. There is a connector for each fan on the board. |
| [* 1] You will now perform an in-line splice soldered connection of the three bundled leads with the lead that has the plug installed. You will perform this type of splice for the red and black wires (separately) as shown in the images. | |
| [* 1] Be sure before soldering that you have the heat shrink tube installed and slid to the end of the lead with the plug. |