Changes to Step #40
Step Lines
| [title] Secure the PCB to the PCB Mount | |
| - | [* 1] Locate (3) of the #4 x |
| + | [* 1] Locate (3) of the #4 x 3/8" sheet metal screws (30250). |
| [* 1] Align the holes in the PCB with the holes in the PCB mount and insert the screws in to each of the three locations. DO NOT TIGHTEN YET | |
| [* 1] Ensure that the thermistor legs still have a slight arc and are not in the direct rear of the hot end where they can be pinched. | |
| [* 1] Tighten each of the three screws two complete turns and then check the thermistor legs. | |
| [* 1] Repeat as necessary until fully tightened. |