Changes to Step #38

Edit by geneb —

Edit approved by geneb

Before
After
Unchanged

Step Lines

[title] Installing the Hotend in the PCB Mount
[* 1] Locate the HE280 PCB Mount (71257)
-[* 1] Align the hotend with the PCB mount as show in the image and gently slide it in place.
+[* 1] Align the hotend with the PCB mount as shown in the image and gently slide it in place.
[* 10] Notice that the side of the heat sink that contains the thermal safety fuse should be on the side of the PCB mount with the opening. (indicated with blue arrows)
[* 1] You will want to arc the thermistor leads slightly as shown in the image (indicated by a green arrow) so they are not pinched between the hot end and the PCB Mount when fastening.