Changes to Step #35

Edit by Matthew Connor —

Edit declined by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Trim Excess Thermistor Legs
-[* 1] After the through hole connections have been soldered, trim the excess thermistor leads on the top side of the HE280 Hotend PCB board. These do ++NOT++ need to be flush with the board, we just need to ensure that they can not short against each other.
+[* 1] After all 4 connections have been soldered, trim the excess thermistor leads on the top side of the HE280 Hotend PCB board. These do ++NOT++ need to be flush with the board. Simply ensure the leads cannot touch each other, which would cause a short.