Changes to Step #34
Step Lines
| [title] Confirm Connections and Solder | |
| [* 1] Confirm that you have the heater cartridge lead and the thermal safety fuse leg inserted in the through holes of the HE280 Hotend PCB board. | |
| [* 10] In photo #1 the heater cartridge lead is on the left (indicated by the + on the HE280 Hotend PCB board) and the thermal safety fuse is on the right. (noted with blue arrows) | |
| - | [* 1] Confirm that the thermistor legs are inserted into the correct through hole location on the HE280 Hotend PCB board. |
| + | [* 1] Confirm that the thermistor legs are inserted into the correct through hole location (marked with red arrows in the picture) on the HE280 Hotend PCB board. |
| [* 1] Using your soldering iron, solder all 4 through hole connections. |