Changes to Step #34

Edit by Matthew Connor —

Edit declined by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Confirm Connections and Solder
-[* 1] Confirm that you have the heater cartridge lead and the thermal safety fuse leg inserted in the through holes of the HE280 Hotend PCB board.
- [* 10] In photo #1 the heater cartridge lead is on the left (indicated by the + on the HE280 Hotend PCB board) and the thermal safety fuse is on the right. (noted with blue arrows)
-[* 1] Confirm that the thermistor legs are inserted into the correct through hole location on the HE280 Hotend PCB board.
-[* 1] Using your soldering iron, solder all 4 through hole connections.
+[* 1] Confirm that you have the heater cartridge lead and the thermal safety fuse leg inserted through the correct holes of the HE280 Hotend PCB board.
+ [* 10] In picture #1, the heater cartridge lead is indicated by the blue arrow on the left and the "+" symbol on the PCB board. The thermal safety fuse leg is indicated by the blue arrow on the right.
+[* 1] Double-check that the thermistor legs are inserted through the correct holes on the PCB board as indicated by the red arrows.
+[* 1] Using your soldering iron, solder all 4 connections indicated by all 4 arrows in picture #1. When complete, it should look like picture #3.