Changes to Step #27
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [title] Preparing the Thermistor |
| + | [* 1] Make a 90 degree bend at the end of the thermistor (the end with the glass bead) using a pair of needle-nose pliers. |
| + | [* 1] To do this: Pinch the needle-nose pliers onto the edge PTFE that is covering the legs of the thermistor, and rotate the needle-nose pliers, making the 90 degree bend. |
| + | [* 1] Compare your result with the picture. |