Changes to Step #26

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here.
+[title] Prepare the Thermistor
+[* 1] Locate the Thermistor 100K (26141) and 100mm long Small PTFE Tube (26190)
+[* 9] Be careful with the Thermistor, it is a fragile component.
+[* 1] Cut the 100mm long small PTFE tube in half. You will now have two pieces that are 50mm long each.
+[* 1] Insert the PTFE tubes over each of the legs of the thermistor. This tube should be fully inserted up to the glass bead on the thermistor.