Changes to Step #26

Edit by Kurt Frymire —

Edit approved by Tim Koscielny

Before
After
Unchanged

Step Lines

[title] Prepare the Thermistor
[* 9] Be careful with the Thermistor, it is a fragile component, if handled too rough it will break.
[* 10] Due to their fragile nature, for orders shipped after 9/27/16, we have included a spare thermistor in your HE280 Hotend kit.
[* 1] Locate the Thermistor 100K (26141) and 100mm long Small PTFE Tube (26190)
[* 1] Cut the 100mm long small PTFE tube in half. You will now have two pieces that are 50mm long each.
-[* 1] Insert the PTFE tubes over each of the legs of the thermistor. This tube should be fully inserted up to the glass bead on the thermistor.
+[* 1] Carefully slide one 50mm tube up one leg of the thermistor, then repeat for the other leg. The tubing should reach up to the glass bead on the thermistor. Do not force the tubes as this may split the thermistor head.