Changes to Step #26
Edit by Matthew Connor —
Edit declined by SeeMeCNC
- Before
- After
- Unchanged
Step Lines
| [title] Prepare the Thermistor | |
| - | [* 9] Be careful with the Thermistor |
| + | [* 9] Be careful with the Thermistor as it is a very fragile component. If handled too roughly, it will break. |
| [* 10] Due to their fragile nature, for orders shipped after 9/27/16, we have included a spare thermistor in your HE280 Hotend kit. | |
| - | [* 1] Locate the Thermistor 100K (26141) and 100mm long Small PTFE Tube (26190) |
| - | [* 1] Cut the 100mm long small PTFE tube in half. You will now have two pieces that are 50mm long |
| + | [* 1] Locate the Thermistor 100K (26141) and 100mm long Small PTFE Tube (26190). |
| + | [* 1] Cut the 100mm long small PTFE tube in half. You will now have two pieces that are each 50mm long. |
| [* 1] Insert the PTFE tubes over each of the legs of the thermistor. This tube should be fully inserted up to the glass bead on the thermistor. |