Changes to Step #26

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Prepare the Thermistor
[* 9] Be careful with the Thermistor, it is a fragile component, if handled too rough it will break.
[* 10] Due to their fragile nature, for orders shipped after 9/27/16, we have included a spare thermistor in your HE280 Hotend kit.
-[* 1] Locate the Thermistor 100K (26141) and 100mm long Small PTFE Tube (26190) The thermistors (x2) are located inside the small PTFE tube for their protection. Carefully remove the the thermistors from the PTFE tube.
+[* 1] Locate the Thermistor 100K (26141) and 100mm long Small PTFE Tube (26190)
[* 1] Cut the 100mm long small PTFE tube in half. You will now have two pieces that are 50mm long each.
[* 1] Insert the PTFE tubes over each of the legs of the thermistor. This tube should be fully inserted up to the glass bead on the thermistor.