Changes to Step #23
Step Lines
| [title] Installing High Temp Fiberglass Insulated Wire | |
| - | [* 1] Slide the High Temp Fiberglass Insulated Wire (side with 10mm |
| + | [* 1] Slide the High Temp Fiberglass Insulated Wire (side with 10mm stripped, into the other end of the wire ferrule (inserted in the last step) |
| [* 10] You should insert the High Temp Fiberglass Insulated Wire until the insulation is flush with the end of the wire ferrule. | |
| [* 1] Crimp the wire ferrule. Do this in three steps, roughly locate the midpoint of the ferrule and crimp the upper portion (side with the thermal safety fuse lead), then the lower side (side with the heater cartridge lead), and finally crimp one last time in the center of the ferrule. |