Changes to Step #20
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [title] Inserting the Wire Ferrule |
| + | [* 1] Slightly bend out the leads from the heater cartridge and the thermal safety fuse. |
| + | [* 1] Slide the ferrule (with insulation installed) over the heater cartridge lead, and then manipulate the lead from the thermal safety fuse to get it inserted into the other end of the ferrule. |
| + | [* 1] Straighten the leads back out so they are running nearly parallel with the heat sink, heat break, and nozzle. |