Changes to Step #11
Edit by Matthew Connor —
Edit declined by SeeMeCNC
- Before
- After
- Unchanged
Step Lines
| [title] Preparing the Heater Block | |
| - | [* 1] Locate the Heater Block (71216), 12v 40 watt Heater Cartridge (26789), and (2) M3 -.5 x 10mm Phillips Pan Head Machine Screws (30318) |
| + | [* 1] Locate the Heater Block (71216), 12v 40 watt Heater Cartridge (26789), and (2) M3 -.5 x 10mm Phillips Pan Head Machine Screws (30318). |
| [* 1] Insert the heater cartridge into the side of the heater block. The leads of the heater cartridge should stick out of the side of the heater block with 3 holes. The leads should be in a horizontal orientation and ***NOT VERTICAL.*** The heater cartridge should be inserted so that it is flush on the opposite face of the heater block. | |
| [* 1] Secure the heater cartridge in the heater block by tightening both of the M3 - .5 x 10mm screws. | |
| [* 9] Be sure to get these M3 - .5 x 10mm screws tight. |