| - | [* 1] Insert wisdom here. |
|---|
| + | [* 1] Locate the Heater Block (71216), 12v 40 watt Heater Cartridge (26789), and (2) M3 -.5 x 10mm Phillips Pan Head Machine Screws (30318) |
|---|
| + | [* 1] Insert the heater cartridge into the side of the heater block. The leads of the heater cartridge should stick out of the side of the heater block with 3 holes. The heater cartridge should be inserted so that it is flush on the opposite face of the heater block. |
|---|
| + | [* 1] Secure the heater cartridge in the heater block by tightening both of the M3 - .5 x 10mm screws. |
|---|
| + | [* 9] Be sure to get these M3 - .5 x 10mm screws tight. |
|---|