| - | [* 1] Insert wisdom here. |
|---|
| + | [title] Install 2 Position Terminal Plugs |
|---|
| + | [* 1] You will now install the supplied 2 position terminal plugs onto the remaining wires. The [document|23|HE280 Whip Diagram] shows the correct connections. |
|---|
| + | [* 9] Make sure the screws in the terminal blocks are as loose as possible to prevent strands of the wires being forced under the connectors. |
|---|
| + | [* 1] The orange wire (Layer Fan) will be inserted into one of the 2 position terminal blocks. |
|---|
| + | [* 1] The red and black wires (Hot End 12v power) will be inserted into the other 2 position terminal block. |
|---|
| + | [* 9] Be sure to get the polarity correct (as shown in the diagram |
|---|
| + | [* 9] Tighten the screw terminals as tight as possible, including the vacant position on the terminal block with the orange wire (layer fan). |
|---|