Changes to Step #10
Step Lines
| + | [title] Boot the Raspberry Pi and Locate it |
|---|---|
| + | [* 1] Put microSD card into Raspberry Pi and turn the power to the Droplit v2 on |
| + | [* 1] Connect an ethernet cable to the Raspberry Pi and your Router (this is a one time setup requirement until the wifi has been connected) |
| + | [* 1] To find out your Raspberry Pi's IP address open your computer's network area. Or visit the online dashboard http://www.nanodlp.com/dashboard to see online nanoDLP printers in your network |