Skip to main content

Changes to Step #8

Edit by geneb

Edit approved by geneb

Before
After
Unchanged

Step Lines

+[title] Final Assembly.
+[* 1] Carefully replace the PEEK fan on the hot end and rest the whole assembly on top of the stand-offs as shown in photo #1.
+[* 1] Grab the three thumbscrews you bought and fix the hot end assembly in place.
+[* 1] Connect up the PEEK and Layer fan connectors, the power connector and the bowden tube. You're done!

Image 1

No previous image

New image

Added

Image 2

No previous image

New image

Added

Image 3

No previous image

New image

Added