Skip to main content

Changes to Step #6

Edit by geneb

Edit approved by geneb

Before
After
Unchanged

Step Lines

+[title] Install female connector on the Rostock MAX
+[* 1] Strip about 1/4" of insulation off of the two power and two thermistor wires coming out of the mesh loom on the Rostock MAX. Install a female crimp socket on each.
+[* 1] You may have two 18ga and two 26ga wires or four 18 ga wires for your hot end. Just as in the previous step, make sure you've got the black & white wires inserted in the positions shown in image #2.

Image 1

No previous image

New image

Added

Image 2

No previous image

New image

Added