Changes to Step #3
Step Lines
| + | [title] Install Male JST Connector on the Layer Fan. |
|---|---|
| + | [* 1] If you've never used a crimping tool before, I recommend taking a look at this tutorial from Hansen Hobbies: http://www.hansenhobbies.com/products/connectors/Connectors.pdf |
| + | [* 1] Grab a pair of male JST connector pins and crimp them on to the Layer fan leads. |
| + | [* 1] Insert the black wire into the #1 position and the red wire into the #2 position as shown in image #2. |
Image 1
No previous image
Added
Image 2
No previous image
Added