| + | [title] Disassembling the Hot End |
|---|
| + | [* 1] Cut the Layer fan wires where you soldered them together during the build. Mark the ends coming from the wiring loom as "Layer" so you can identify them later. |
|---|
| + | [* 1] Cut the PEEK fan wires where you soldered them together during the build. Mark the ends coming from the wiring loom as "PEEK" so you can identify them later. |
|---|
| + | [* 1] Measure 1-1/4" from the top of the melamine hot end mount and cut the four wires leading to the hot end. |
|---|
| + | [* 1] Using your Phillips screwdriver & 5/16" wrench, remove the three screws that hold the hot end to the effector platform. |
|---|