Changes to Step #8

Edit by geneb —

Edit approved by geneb

Before
After
Unchanged

Step Lines

[title] Installing the Ball Arms
[* 1] Press a Ball Arm on to the two mounting posts on the front of the carriage as shown in the first photograph.
-[* 1] Fix the Ball Arm in place using two #4, 3/8" machine screws and two #4 flat washers.
+[* 1] Fix the Ball Arm in place using two #4, 1/2" machine screws and two #4 flat washers.
[* 1] You're done! Now move on to the next HowTo, "Installing the Ball-Joint Delta Arms"!