Changes to Step #7
Step Lines
| [title] Installing the U-Joint Axles | |
| [* 1] Install an axle support on to the two posts on the face of the carriage as shown in the first photograph. | |
| [* 1] Fit a 3" axle into the axle groove in the mount. Ensure that it's centered on the carriage. | |
| - | [* 1] Using two #4, |
| + | [* 1] Using two #4, 1/2" machine screws and two #4 washers, fix the axle and axle mount in place as shown in the second photo. |
| [* 1] You're done! Re-install the delta arms - they go back on just as they did the old carriages. You'll need to change your Delta Radius in order to recalibrate your printer properly. |