Changes to Step #3
Step Lines
| + | [title] Assembling the Spring Arms |
|---|---|
| + | [* 1] The spring arms consist of an inner and outer halves that retain two of the R4ZZ bearing rollers you assembled in Step #1. |
| + | [* 1] Set two RZ44 bearings on the inner spring arm as shown in photo #2. |
| + | [* 1] Press fit the outer spring arm on to the two small posts protruding from the inner spring arm. The fit is very tight, but they will fit! |
| + | [* 1] In order to fully seat the pins once they're started in the holes, you can tap them in using the back end of your screwdriver as a hammer. |
| + | [* 1] Assemble three complete sets. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added