Changes to Step #7
Step Lines
| [title] Adding SeeMeCNC Slicing Profiles | |
| - | [* 5] In Step |
| + | [* 5] In Step 2, we had you download ALL custom SeeMeCNC slicing profiles to your computer. (master.zip) |
| [* 5] Locate and extract the downloaded files on your computer. These are the "slicing profiles master" zipped files. | |
| [* 1] In Cura, select "Preferences" in the top menu bar, then "Configure Cura..." | |
| [* 1] A window opens, and on the left, select "Profiles". Below default profiles are ***custom profiles.*** (note: default profiles will not work) | |
| - | [* 1] Select "Import" then navigate to the extracted slicing profiles folder. slicing-profiles-master > SE300 > Cura > any 4. |
| + | [* 1] Select "Import" then navigate to the extracted slicing profiles folder. slicing-profiles-master > SE300 > Cura > any 4.6 or higher (see photo one) |
| [* 1] Open a slicing profile. The slicing profiles have an extension type of ".curaprofile" and are catagorized by hotend type and nozzle size. | |
| [* 1] The new slicing profiles will now show up in the Print Setting list in Cura under the Profile drop list. (see second photo) |