Changes to Step #7

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Adding SeeMeCNC Slicing Profiles
-[* 1] In Step 1, ALL custom SeeMeCNC slicing profiles were downloaded. (master.zip)
-[* 1] Extract the downloaded slicing profile master zipped files.
+[* 5] In Step 1, ALL custom SeeMeCNC slicing profiles were downloaded to your computer. (master.zip)
+[* 5] Extract the downloaded files on your computer. These are the "slicing profile master" zipped files.
[* 1] In Cura, select "Preferences" in the top menu bar, then "Configure Cura..."
[* 1] A window opens, and on the left, select "Profiles". Below default profiles are ***custom profiles.*** (note: default profiles will not work)
[* 1] Select "Import" then navigate to the extracted slicing profiles folder. (.....slicing-profiles-master > SE300 > Cura > any 4.5 or higher)
[* 1] Open a slicing profile. The slicing profiles have extension type of ".curaprofile" and are catagorized by hotend type and nozzle size.