Changes to Step #7

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Adding SeeMeCNC Slicing Profiles
[* 1] In Step 1, ALL custom SeeMeCNC slicing profiles were downloaded. (master.zip)
-[* 1] Extract the downloaded slicing profiles master zipped file.
+[* 1] Extract the downloaded slicing profile master zipped files.
[* 1] In Cura, select "Preferences" in the top menu bar, then "Configure Cura..."
-[* 1] A window opens, on the left select "Profiles". We DO NOT use default profiles, they will not work. Below default profiles are ***custom profiles.***
+[* 1] A window opens, and on the left, select "Profiles". Below default profiles are ***custom profiles.*** (note: default profiles will not work)
[* 1] Select "Import" then navigate to the extracted slicing profiles folder. (.....slicing-profiles-master > SE300 > Cura > any 4.5 or higher)
-[* 1] Open a slicing profile. Slicing profiles end with "....curaprofile" and are catagorized by hotend type and nozzle size.
+[* 1] Open a slicing profile. The slicing profiles have extension type of ".curaprofile" and are catagorized by hotend type and nozzle size.