Changes to Step #7

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

-[title] Setting Up Your Machine in Cura
+[title] Additional Slicing Profiles
[* 1] In the Cura window, select "File" and "Open File(s)..."
[* 1] Navigate to the folder you just extracted. You'll see folders for various different machines and hotend types, but for the sake of this guide we'll take you through installing the stock hotend we include on the RostockMAX v4 and the Artemis.
-[* 1] Navigate through "slicing-profiles-master\SE300\Cura\Cura 4-6-1"
-[* 1] In the "Cura 4-6-1" folder you'll see various different nozzle sizes. We'll be using the stock default 0.5 (050) nozzle as an example, but you can follow the same steps for whatever size nozzle you have installed on your machine.
+[* 1] Navigate through "slicing-profiles-master\SE300\Cura\Cura 4-6"
+[* 1] In the "Cura 4-6" folder you'll see various different nozzle sizes. We'll be using the stock default 0.5 (050) nozzle as an example, but you can follow the same steps for whatever size nozzle you have installed on your machine.