Changes to Step #7
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Setting Up Your Machine in Cura |
|---|---|
| + | [* 1] In the Cura window, select "File" and "Open File(s)..." |
| + | [* 1] Navigate to the folder you just extracted. You'll see folders for various different machines and hotend types, but for the sake of this guide we'll take you through installing the stock hotend we include on the RostockMAX v4 and the Artemis. |
| + | [* 1] Navigate through "slicing-profiles-master\SE300\Cura\Cura 4-2-1" |
| + | [* 1] In the "Cura 4-2-1" folder you'll see various different nozzle sizes. We'll be using the stock default 0.5 (050) nozzle as an example, but you can follow the same steps for whatever size nozzle you have installed on your machine. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added