| | [* 10] Next we'll take you through the process of installing a SeeMeCNC custom 3MF project file. Our Quick Start 3MF project file will create the following: |
|---|
| | [* 7] a machine printer profile |
|---|
| | [* 7] sample STL model |
|---|
| | [* 7] SeeMeCNC custom slicing profile |
|---|
| | [* 1] From the menu bar in Cura, select "File" then "Open File(s)..." |
|---|
| | [* 1] Open the file downloaded in STEP 1 "Quick Start PLA 050noz Artemis Profile.3mf" and select "Open as project" |
|---|
| | [* 1] Cura is now setup. The example is for dual PLA printing using a 0.5mm diameter nozzle (out standard). |
|---|
| | [* 1] You can slice good gcode files now! The following steps of this guide will help you build upon your new Cura installation. :) |
|---|