Changes to Step #15
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| [title] Adjust Printer Height in the Firmware | |
| [* 1] Re-install all the covers on the machine. | |
| [* 1] Plug in the machine and turn it on. | |
| [* 1] Follow these guides and decrease the printer height in your firmware by 23mm: | |
| - | [* 1] RAMBo |
| + | [* 1] [guide|134|RAMBo] |
| [* 1] DuetWifi | |
| [* 1] [guide|103|After changing the machine height in the firmware, follow this guide to fully re-calibrate your printer.] |