Changes to Step #15

Edit by Caleb Fairres —

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] Adjust Printer Height in the Firmware
[* 1] Re-install all the covers on the machine.
[* 1] Plug in the machine and turn it on.
-[* 1] Follow these guides to decrease the printer height in your firmware by 23mm:
+[* 1] Follow these guides and decrease the printer height in your firmware by 23mm:
[* 1] RAMBo
[* 1] DuetWifi
+[* 1] [guide|103|After changing the machine height in the firmware, follow this guide to fully re-calibrate your printer.]