Changes to Step #15
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Adjust Printer Height in the Firmware |
|---|---|
| + | [* 1] Re-install all the covers on the machine. |
| + | [* 1] Plug in the machine and turn it on. |
| + | [* 1] Follow these guides to decrease the printer height in your firmware by 23mm: |
| + | [* 1] RAMBo |
| + | [* 1] DuetWifi |