Changes to Step #14
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| [title] Installing the Bed Assembly | |
| - | [* 1] Apply a drop of oil to the tip of the 1 3/4" 6/32 pan head screws |
| + | [* 1] Apply a drop of oil to the tip of the threads on the 1 3/4" 6/32 pan head screws |
| + | [* 1] Pass the pan head screws through the mounting holes on the hat spreader, then through the PEEK standoff, the melamine frame of the printer, then the #6 washer with the 6/32 stainless steel nylon lock nut |